• LightFastness {{site.selectedConfiguration.lightFastness}}

    ISO 105-B02

    Lightfastness relates to the ability of a textile to retain its colour under light. When testing for lightfastness, samples are exposed to artificial daylight for a specified period.

    The evaluation scale ranges from 1 (worst) to 8 (best). An increase of one point corresponds to a doubling of the lightfastness, i.e. the same fading takes twice as long.

  • Visual light transmission {{site.selectedConfiguration.lightTransmission}}%

    Light transmittance indicates the percentage of the visible light penetrating the textile. Densely woven textiles in dark colours usually have a lower light transmittance, whereas loosely woven fabrics in light colours allow more light to pass through. 

  • Absorption 0.35/Class D (Absorption flat) 0.50/Class D (Absorption folded)

    EN ISO 354

    Acoustic absorption is indicated as αw-value which approximately corresponds to the percentage of sound absorbed. For instance, an αw-value of 0,4 translates into 40% absorption of sound.  Acoustic absorption of a textile is measured in its flat and draped state.

  • Airflow 66 Pa s/m

    EN ISO 9053-1

    Airflow resistance influences the sound absorbing qualities of a textile. Typically, the denser the construction of the textile, the higher the value. 

  • Fire tests AS/NZS 1530.3 • BS 5867 part 2 type B • FAR 25.853 • IMO FTP Code 2010 Part 7 • NF P 92 507 M1 • NFPA 701 • NT FIRE 043 • SN 198 898 5.2 • UNI 9177 Classe 1 • DIN 4102 B1 • EN 13 773 class 1 • ASTM E84 Class A Unadhered • EN 13501-1, B-s1, d0 • CAN ULC S109 • CAN ULC S102 • GB 8624 B1 • JIS L 1091 A-1 D • AS/NZS 3837 class 1 • IMO FTP Code 2010 Part 5

    There are differing requirements concerning the flame-retardancy of textiles dependent on the area of application, country or even region. Our textiles pass the majority of international standards and are also tested for a selection of regional requirements.

  • Marine use
  • Fire resistant
  • Flammability
  • Wet and dry crocking
  • ¿ Colourfastness to light
  • ¡ Physical properties
  • Cleaning and care:
    FWash at max. 60°C, mild process
    BDo not bleach
    CDo not tumble dry
    IIron at medium temperature (max. 150°C)
    DProfessional dry cleaning with tetrachloroethylene, normal process
  • Produced in: Holanda
  • Warranty: 10 years
  • Certificación Greenguard
  • Shrinkage: Approx. 1 / 1 %
  • Wash load: Medio
  • Colour difference: Diferencias pueden occurrir
  • Roll length: Approx. 29 metres (Approx. 32 yds)
  • Transparency: Dense
  • Sustainability documentation:: Greenguard Gold, HPD, EPD
{{ 'Labels.Kvadrat.Client.ProductDetail.Previews.Designer' | translate }}
Care instructions curtain textiles

Regular cleaning is important in order to keep the curtain textile looking its best and to prolong its life. Dust and dirt wear down the textile and also reduce its fire-retardant properties.

  • Limpieza periódica

    Recomendamos lavar las cortinas una vez al año. Si se utilizan mucho, puede que sea necesaria una limpieza más frecuente. Todas las telas para cortinas de Kvadrat y Kinnasand se facilitan con todas las etiquetas de mantenimiento. Con el fin de reducir el riesgo de alergias, se recomienda utilizar detergentes de lavado que no contengan blanqueadores, perfumes o colorantes. Recomendamos utilizar un detergente suave sin abrillantador óptico para uso general ya que, según las instrucciones de cuidado, admite el lavado. Tenga en cuenta que puede existir un encogimiento del 1 al 3%. Este consejo es sólo una recomendación. Si desea obtener más información, le recomendamos se ponga en contacto con una empresa de limpieza profesional. Un centro de limpieza profesional también le puede ayudar a elaborar programas de mantenimiento que garanticen que los tejidos se conservan adecuadamente, de forma que se obtenga un buen clima interior y una máxima duración de las cortinas.